Python 871XP Instrukcja Użytkownika Pobierz pdf (Strona 36)

ddiiaaggnnoossttiiccss

The microprocessor at the heart of your system is constantly

monitoring all of the switches and sensors connected to it. It is

designed to detect any faulty switches and sensors and prevents

them from disabling the entire system. The microprocessor will

also record and report any triggers that occurred during your

absence. Refer to the System Status Chirps and Table of Zones

sections of this guide for diagnostic information.

arming diagnostics

If the security system is armed at the same time that an input is

active (such as a door opening or sensor triggering), you will hear

one siren chirp to indicate arming and a second siren chirp to

indicate Bypass Notification. A Bypass Notification chirp means

that the security system ignores the input that was active when

the system was armed, until that input ceases. Three seconds

after that input ceases, the security system will resume normal

monitoring. For example, if your vehicle has an interior light exit

➜

note: Arming and disarming the system does not reset

this function! The only ways to reset a bypassed zone are

for it to not trigger for 60 minutes, or to turn on the igni-

tion. If testing your system, it is important to remember

that the NPC programming can cause zones to be

bypassed and appear to stop working. If five chirps are

heard when disarming, NPC has been engaged. If you

wish to clear the NPC memory, turn the ignition on.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 51 52

Brak uwag

Modelle	Dokumententyp
444445439	Datenblatt Stoves 700DCP, 1 Seiten
444445441	Datenblatt Stoves 800GDP, 1 Seiten
444445449	Datenblatt Stoves 1100PRO, 1 Seiten
444447261	Datenblatt Stoves 900K-Line, 1 Seiten
444448483	Datenblatt Stoves 600DCP, 1 Seiten
444448484	Datenblatt Stoves 900DTC, 1 Seiten
50406087	Datenblatt Stoves 700GDP, 1 Seiten
600CGH MK2	Betriebsanleitung Stoves 600CGH MK2, 8 Seiten

Python 871XP Instrukcja Użytkownika Strona 36